YOUR MOST RELIABLE SUPPLIER

This device is a PoE balun that allows to combine the signal from two cameras to a switch through a single network cable. is used to place two 10/100 Ethernet circuits on a long-lived Ethernet cable with or without a PoE port supports 2 individual data speed connections 10/100 and up to 30w for each one (60watts in total) a in Cat.6 The end with two RJ45 connectors is connected to the switch (One connector in the PoE slot and the other in the LAN slot). Using a UTP cable, preferably Cat.6, it is connected to the other end by transferring power data. The other end, has an RJ45 connector, which can be directly connected to a camera, wifi ... and the female end can also be connected directly to a camera or a UTP cable to lengthen the connection and connect it to a camera located at a further point.